ashtech MobileMapper 100, Руководство по началу работы, Страница: 34 / 78

Engli
sh
30
– An SHP layer can only contain a single type of feature.
When creating a new layer, you should first indicate if
it is created to hold 2D/3D point, 2D/3D line or 2D/3D
polygon features.
– A MIF layer can contain any type of feature (point, line
or polygon).
– A CSV layer can only support point features.
• DXF format: Each layer is embedded into the file and can
contain any type of feature (point, line or polygon).
Attaching Layers to a Map Job
Here are the two different contexts in which you can create a
new layer to be attached to a Map job:
• With a job open in the current MobileMapper Field
session, you tap
Menu
>
Job
>
New...
to create a new *.map
job for which the program will ask you directly to add new
layers, either by creating new ones or by selecting existing
ones.
• With a job open in the current MobileMapper Field
session, you tap
Menu
>
Layers...
and then you tap on the
Add
button.
From the screen displaying the
Create a new layer
button, do
the following:
1. Tap the
Create a new layer
button.
2. Enter the following parameters:
•
Name
: Enter a name for the layer using the virtual
keyboard. The name of the layer should depict the type
of features you will collect with this layer (e.g. Points,
Lines, Areas, etc.).
•
Folder
: Choose a folder where you want to store the
layer you are creating. This choice should be made in
conjunction with the choice of the storage medium
(see
Location
).
The
None
option stands for either the “My Documents”
folder or the “Storage Disk” folder in the main memory,
or the root folder of the storage card. All other options
available in the drop-down menu will be a sub-folder of
the “My Documents” folder
or the “Storage Disk”
folder in the main memory, or the root folder of the
storage card.
If you want to use a special folder to store your layers,
first create it using File Explorer. You can only create