18
© 2021 United States Stove Company
MANUAL LIGHTING INSTRUCTIONS
1.
Open stove door. Remove any items necessary
for easy access to the pilot (for example: logs,
screens, etc.).
2. Follow appropriate lighting instructions found
previously. Instead of pushing and releasing the
piezo button, light a match and hold the flame
to the end of the pilot and ignite the pilot.
3.
After control knob has been released and pilot
stays lit, reinstall any items that were removed
for pilot access.
4.
Call a qualified service technician for repair or
replacement of the piezo ignitor.
CLEANING AND SERVICING
WARNING:
TURN OFF THE HEATER AND ALLOW TO
COOL BEFORE CLEANING. DISCONNECT THE
ELECTRICAL POWER BEFORE CLEANING OR
SERVICING.
Annual inspection and cleaning by your dealer or
qualified service technician is recommended to
prevent malfunction and/or sooting. Remove logs,
handle carefully by holding gently at each end.
Gloves are recommended to prevent skin irritation
from ceramic fibers. If skin becomes irritated, wash
gently with soap and water. Refer to manual for
correct log placement.
Periodic Cleaning
- See parts diagram for location
of items discussed below.
•
Do not use cleaning fluid to clean logs or any part
of the heater.
•
Brush logs with a soft bristle brush or vacuum
with a brush attachment.
• Vacuum loose particles and dust from the front
and rear burners, control, piezo covers and grate
weldment.
•
Inspect and clean the burner air intake holes.
Remove lint or particles with a vacuum, brush, or
some pipe cleaners. Failure to keep air intake holes
clean will result in sooting and poor combustion.
• The external case should be dusted and wiped
with a moist cloth.
Annual Cleaning/Inspection
- Refer to parts
diagram for location of items.
•
Inspect and clean burner air intake holes. Remove
lint or particles with a vacuum, brush or some
pipe cleaners. Failure to keep the air intake holes
clean will result in sooting and poor combustion.
•
Inspect and clean all burner ports.
•
Inspect ODS pilot for operation and accumulation
of lint at air intake holes.
•
Verify flame pattern and log placement for proper
operation.
• Verify smooth and responsive ignition of main
burner and rear burner.
For Parts Assistance Call: 800-750-2723 Ext 5051 or Email: [email protected]
The information in this owner’s manual is specific to your unit. When ordering replacement parts the
information in this manual will help to ensure the correct items are ordered. Before contacting customer
service write down the model number and the serial number of this unit. That information can be found on
the certification label attached to the back of the unit. Other information that may be needed would be the
part number and part description of the item(s) in question. Part numbers and descriptions can be found
in the “Repair Parts” section of this manual. Once this information has been gathered you can contact
customer service by phone 1-800-750-2723 Ext 5051 or Email [email protected].
Model Information
Model Number
Serial Number
HOW TO ORDER REPAIR PARTS
OPERATION
Содержание AGC500VF
Страница 24: ...24 2021 United States Stove Company NOTES ...
