Version: V1.0 Apr 28th,2018
1
AW-D316 Conventional Sounder Beacon
User Manual
I. Overview
AW-D316 Conventional Sounder Beacon can give audible
and visual alarms after being connected to a DC24V
power supply. It can be used with a bus-type fire alarm
control panel through an output module. After receiving a
start command given by the fire alarm control panel
following an accident, the output module will start the
Sounder Beacon. After that, the Sounder Beacon will give
a dazzling visual alarm signal and a harsh audible alarm
signal to remind the persons on the scene of the accident
of the fact that a fire has occurred on the site quickly and
the necessity to take related evacuation measures, thus
preventing the fire accident from becoming a major one.
The Sounder Beacon may be used to give audible alarms
and visual alarms at the scenes of accidents.It is
applicable to places like high-rise residential buildings,
public places, hotels, amusement buildings,factories,
shopping centers, hospitals, schools, office buildings and
stock exchanges, and particularly to the places with a low
visibility or the possibility of generation of smoke.
II. Product features
✓
Meet both EN54-3 and EN54-23
✓
Designed with an upper cover and a lower cover
and installed on an independent base, it can be
installed,
debugged
and
maintained
conveniently.
✓
Suitable for wall and ceiling mount application
✓
Providing 16 tones.
✓
Highly efficient LED technology and specially
designed lens
✓
Light output synchronization.
III.Technical Specification
1.
Executive Standard: EN54-3/EN54-23 Type A indoor
2.
Operating voltage:DC24V(20V~28V)
3.
Operating Current:
≤
100mA@DC24V
4.
Sound output:
≥
75dB(A) @ 1m(Tone 1).
5.
Number of tones:16
6.
EN54-23 coverage:C-3-8/W-2.4-6
7.
Flash rate: 0.5Hz
8.
Flash color: white
9.
Light output synchronization:meets EN54-23
10. Protection class: IP21C
11. Operating temperature: -10
℃
～
+55
℃
Relative
Humanity:≤95% (non-condensing)
12. Material Lens/Body: Flame retardant PC/ABS
13. Dimension:
φ
110mm
×
108mm (with base) ,See
Fig1.
14. Weight:about 266g
Fig.1
V. Tone Setting
Fig.2
The tone of the sounder beacon can be set by the 4-way
DIP switch,which is at the back of the main body(see
Fig. 2). For more detail, please refer to the Tone Table.
Note:e.g.
”1,0,0,0”means “Switch 1 is ON, Switch 2~4 are
OFF
”.
Tone Table
Tone
Switch
Decription
1
0,0,0,0
2
1,0,0,0
970Hz
3
0,1,0,0
800Hz/970Hz@2Hz
4
1,1,0,0
800Hz-970Hz@1Hz
5
0,0,1,0
970Hz 1s off/ 1s on
6
1,0,1,0
970Hz 0.5s/ 630Hz,0.5s
7
0,1,1,0
500Hz-1200Hz
×
3,3.5s on /0.5s off
8
1,1,1,0
2840Hz,0.5s on/0.5s off
×
3 /1.5s off
9
0,0,0,1
2840Hz,0.4s on,0.3s off
10
1,0,0,1
550Hz,0.7s/1000Hz,0.33s
11
0,1,0,1
1500Hz-2700Hz@3Hz
12
1,1,0,1
2400Hz
13
0,0,1,1
14
1,0,1,1
2400Hz-2900Hz@9Hz
15
0,1,1,1
2400Hz-2900Hz@3Hz
16
1,1,1,1
500Hz-1200Hz,3.75s on/0.25s off
