POOL TECHNOLOGY
The PP60 pH automatically control pH in the pool water. Measuring is done by pH probe. The setup pH-
value is displayed on a red LED-display which also serves for unit control and setting.
PP60 automatically measure and dose the pH liquid into the pool water. PP60 pH is a very compact unit
consisting from control unit, pH-probe and dosing pump with an output of 60 ml/min. The unit is wall
mounted.
Installation
Install of the PP60 pH unit to filtration system is shown in Fig. 1. PP60 pH requires connection to the water
from pool. Connect the water supply to PP60 pH after the pump and before the filter. Injection valve from the
PP60 pH must be placed after the filter.
Warning:
NEVER PLACE INJECTION VALVE BEFORE THE MEASURING PROBE
. All connections are hand tight
only. The PP60 pH unit is turned on when is connected to power source and must be connected to
samesocket as filtration pump.
Technical description
Power supply
230 V, 50 Hz
Operating tempe5 ÷ 40°C
Power consumption
4,5 VA
Weight
1500 g
Fuse
T500 mA
Dimension
150 x 300 x 120 mm
Overvoltage category
II
Pump output
60 ml/h
Protection
IP50
Max. water pressure
1 bar
Tel.: +420 244 912 210
Email: [email protected]
Stránka z
2
6
