Ascon Tecnologic - e31- - OPERATING INSTRUCTIONS - PAG. 9
6. ACCESSORIES
6.1
Parameters configuration by A01
The instrument is equipped with a connector that allows the
transfer from and toward the instrument of the functioning pa-
rameters through the device
A01
with 5 poles connector.
This device it is mainly usable for the serial programming of
some instruments which need to have the same parameters
configuration or to keep a copy of the parameters setting of an
instrument and allow its rapid retransmission.
The same device allows to connect a PC via USB with which,
through the appropriate configuration software for “AT Univer-
salConf tools”, the operating parameters can be configured.
To use the device A01 it is necessary that the device or instru-
ment are being supplied directly or through the key.
AC supply
Supply adapter
12 VDC
Power supply
Ente
r
PW
S
12
V
A B C
TTL
+
-
US
B
to PC
USB
Ente
r
PW
S
12
V
A B C
TTL
+
-
US
B
to PC
USB
For additional info, please have a look at the A01 instruction
manual.
6.2
Parameters configuration by AFC1
The
AFC1
is a contactless
NFC
(
N
ear
F
ield
C
ommunica-
tions) connection device that allows to
Upload/Daownload
the operating parameters
From/To
the instruments.
The
AFC1
is powered directly by the
USB
port through
which is connected to a
PC
.
When the instrument is equipped with the
NFC
communica-
tion option, the parameter configuration performed with the
“
AT UniversalConf
” program (see previous paragraph) can be
transferred to the instrument also through the
AFC1
device.
To load the operating parameters in the instrument using the
AFC1
device, place the instrument on the
AFC1
with the dis-
play facing the
NFC
symbol (
), then send the parameters
to the instrument’s memory.
USB
