Ascon tecnologic AC3nP, Руководство по установке

Страница: 13 / 38

Chapter 1 - Product Description
7
• Insert the four mounting clamps, in the rear side of the P04 Operator Panel as illus-
trated;
• Now mount a retaining screw in the hole present in each clamp;
• Rotate clockwise the four clamps screws until the instrument is firmly locked to the cab-
inet panel. Do not over tighten the screws, to avoid panel distortions;
• The nP4 CPU and the expansion modules must be mounted on a dedicated DIN rail
located in the same cabinet or, in the case of a remote installation, in a different one.
The Operator Panel and the CPU communicate through the Ethernet cable.
Rear side
Insertion
point
Final
position
Insertion
point
Insertion
points
Final
position