TD 92326GB
2009-03-10 / Ver. E
Installation and Operation Manual
VoIP Gateway
44
4
Click “OK”.
8.3.1
Configure Full Directory Replication
1
Select LDAP > Replicator.
Figure 41. Full Replication
2
Select "Full Replication" in the Type drop-down list.
3
Select the Enable check box.
4
Enter the IP address to the LDAP server in the Server text field.
5
Enter the IP address to the alternative LDAP server in the Alt. Server text field.
Note:
If this VoIP Gateway is configured as a standby LDAP server, enter "0.0.0.0"
in the Alt. Server text field.
6
Select a filter method from the Filter Type drop-down list
• PBX Name - Enter the name of the VoIP gateway to limit the replication to users
of a certain group
• LDAP Filter - Enter an LDAP filter to limit replication to certain LDAP objects
7
Enter the LDAP User name and Password in the User and Password text fields.
8
Click "OK".
Note:
In the case of Master to Standby Master Full Directory Replication, do not register
new Portable Devices when the LDAP Server is down even if there is a Standby LDAP
Server in the system.
• User
Enter the name (as [Windows Domain\User Name]) or the
DN (Distinguished Name) of a user with read access to the
Active Directory. If a DN is entered it will usually be one of:
cn=John Doe,cn=users,dc=innovaphone,dc=sifi, where
dc=innovaphone,dc=sifi represents the DN-setting from
above.
• Password
The password required for the User-setting.
• In Maps
Maps for incoming attributes must be configured here. An
in-map controls which content of which incoming attribute
goes into a runtime symbol table. See
• Out Maps
Maps for outgoing or local attributes must be configured
here. An out-map controls which runtime symbol table entry
fills a local attribute. See
.
Figure 41.
Figure 42.
Figure 43.
