TD 92326GB
2009-03-10 / Ver. E
Installation and Operation Manual
VoIP Gateway
131
1
Create a PBX object in the master PBX Application in VoIP Gateway 1.
Figure 120. Create PBX object
Set up a the slave PBX Application in VoIP Gateway 2...n as follows:
2
Select PBX > General and set PBX mode to “Slave”.
Figure 121. Set up a Slave PBX Application
3
Enter the IP address of the PBX to be used as master in the
Slave PBX
area.
4
Enter the IP address of an alternative master PBX in the
Slave PBX
area, if available.
5
Enter the respective password of the location definition which you have created in
the master PBX Application for this PBX object definition under Password.
Proceed as follows to assign a PBX to a user:
6
Set up a new subscriber or click on the name of the desired user in the Objects list.
7
Select the location of your choice in the PBX field.
