20
20310997en_ba_a0
Using the extended-feature functions
Transparent mode (Tone dial mode DTMF)
During a call connection the tone dial mode can be used ta activate a function such as,
for example, the remote control of an answering machine.
"Long Click" of the * key until "Tone Dial"
appears. Enter the character sequence of the
desired function.
After carrying out this procedure:
Press the C-key to switch the tone dial mode off
again
or
Press the Foxkey under "Reset".
Beginning and ending enquiry calls
The caller you are talking to on the telephone asks a question you cannot answer. You
wish to call a fellow employee for information, without cutting off your connection with
the caller.
Enter the number of the subscriber you wish to
call for the information.
Press the Foxkey under "Enquiry"; the subscriber
is called (while the other connection is put on
hold).
After obtaining the information you needed:
Press the C-key to switch back to your call with
the waiting caller.
Note
If the Call key is pressed after an enquiry call, a continuous tone will sound for 10
seconds. Press the Call key while this tone is sounding to reconnect the handset to
the waiting subscriber.
0
7
9
8
4
6
5
1
3
2
C
Reset
Enqui
0
7
9
8
4
6
5
1
3
2
C
