18
20310997en_ba_a0
C
0
7
9
8
4
6
5
1
3
2
Using the extended-feature functions
Requesting a callback
You request a call back from an internal subscriber whose line is busy or who is not
answering.
Press the Foxkey under "Call_back". The
message "Call expected from the number nnn"
appears in the display.
By pressing the Foxkey under "Reset" you can
cancel the requested call back.
Note
Only one call back can be activated at a time.
Sending a message
Standard messages are stored in the PBX. After failing to reach a subscriber, you can
select one of these messages, add to it or change it if necessary and then send it to the
subscriber or a group you are trying to reach.
Press the M-key repeatedly until "Message"
appears. Press the Foxkey under "Message".
Press the Foxkey repeatedly under "
¥
" until a
suitable message appears (i-symbol on the
display).
Press i-key once or several times to display the
entire message.
Edit the message using the C-key and the
alphanumeric dialling keypad (if necessary, see
"Dialling with a name").
Press the Foxkey under "Ok".
Dial the number of the subscriber/the group to
whom the message is directed. Press the Foxkey
under "Ok" to send the message.
Notes
•
This procedure can also be initiated with "Dialling preparation", i.e. enter the number
first and then select the message.
•
If you wish, you can also delete the entire message with the C-key and write your
own.
M
Msg.
¥
Ok
0
7
9
8
4
6
5
1
3
2
Ok
Reset
C–back
