ASCOM Eurit 4000, Руководство по эксплуатации

Страница: 46 / 104

41
20324744en_ba_a0
Alternating
Alternating means that you can speak alternately with two existing calls.
Select the person you wish to call. Press the OK key to be connected. The
other call is put on hold.
disconnect Press the Fox key below disconnect to end the call. You will now be
reconnected with the first caller.
Parking a call
You are conducting a phone call and would like to continue the call on another ISDN
telephone connected to the same S
0
-bus:
PARK Press the PARK key and go to the other telephone.
PARK Once at the other telephone, press the PARK key again to resume the call.
➭
If you have several telephones on the same S
0
-bus and if there is the possibility that
those telephones need to be parked simultaneously, then you must define different
park codes. From the "User settings" menu, you can change the park code on the
"Parkcode" line.
Transferring a call
You are alternating between two existing calls with two different people and you would
like to set up a call between those two people:
>> Press the Fox key below >> until transfer appears.
transfer Press the Fox key below transfer . You have now set up a call between the two
people you were speaking to and you now hear the busy tone.
➭
Your Ascom Eurit 4000 is set up for call transfer. However, call transfer is not
supported by all network operators.
Three-party conference
You are making a phone call and would like to include a third person:
new Press the Fox key below new . The current call is put on hold.
Enter the phone number of the third person you wish to include and you will
be connected.
>>
Press the Fox key below >> until 3-PTY appears.
3-PTY Press the Fox key below 3-PTY . All calls are connected together.
Everyone can listen and speak.
Phone calls
0
7 9
4 6 5
1 3 2