ASCOM Eurit 4000, Руководство по эксплуатации

Страница: 19 / 104

14
20324744en_ba_a0
Getting started
Select a "not defined" line and press the Fox key below edit (or press the OK
key). The display shows the entry fields for the user data.
User
name
Select the "User name" line and enter a name.
Phone Select the "Phone number" line and enter the multiple subscriber number
number (MSN) you wish to assign to that user. Enter the phone number without area
code (prefix).
save Press the Fox key below save .
➭
If you do not define any MSN on your telephone, the telephone will ring when a call
is made to any of the possible phone numbers. If connecting to a PBX, enter the
number of the extension.
➭
If you have not entered a user name, the phone number is used as the user name.
Ringing tone
When you have defined several users, give them each a different ringing tone melody
from the "Ringing tone" menu. As soon as the telephone rings, you can tell which user
the call is for.
Press the user key until the display shows the user to whom you wish to assign
a specific ringing tone melody.
Select the "Melody" line and press the OK key. From the pop-up window,
select the required melody and then press the OK key.
save Press the Fox key below save .
Adjusting the date and time
Normally, you do not need to adjust the date or time, because the date and time are
automatically reset via the network every time an outgoing call is made. You can manually
adjust the date and time from the "Installation/Date and time" menu:
Date Select the "Date" line and overwrite the digits.
Time Select the "Time" line and overwrite the digits.
save Press the Fox key below save .