ASCOM Eurit 20, Руководство по эксплуатации

Страница: 19 / 26

17
Programming the exchange access code
If the telephone is connected to a PBX the exchange access code may have to be programmed, for
instance to ensure correct dialling of numbers from the caller list.
Press the Foxkey for 3 seconds, followed by numbers "1"
and "9".
The display prompts you to enter the exchange access code.
Enter the exchange access code.
Press the memory key to store.
Once you have programmed the exchange access code, numbers can be stored in the
speed-dial memory with prefix but without exchange access code.
The Foxkey allows you to delete a preprogrammed exchange access code and terminate
the procedure using the memory key.
Enquiry call
If the telephone is connected to a PBX it may be useful to configure the parking key as the enquiry
call key. The "Park/retrieve call" function can then be called up by pressing the Foxkey followed by
"1".
This can be programmed as follows:
Press the Foxkey for 3 seconds, then press the parking key.
Press the Foxkey. The display alternates between "Park On"
and "Park OFF".
Press the memory key to store the desired setting.
"Park On" means that the parking key is programmed for the "Park/retrieve call"
function (ex-factory setting)
"Park Off" means that the parking key is programmed for the "Enquiry call" function
PBX Operation