PRELIMINARY
TD 92333GB
2006-03-20/ Ver. PA8
User Manual
9d24 Mkll Cordless Telephone
35
key (down) and step to “Information”. Press navigation key (right) to view information
about:
• IPDI: The unique global GAP identity number for the SIM card.
• IPEI: The unique global GAP identity number for the handset.
• SW version: Here you can see which version of the handset software you have.
• AP SW version: The Alarm Module software. If the Alarm Module is not connected, it
will be indicated with NC (Not Connected).
Tip
: There is a quick access code you can use to enter the information mode directly
without using the menu. The quick access code is *#46#.
7
Advanced Functions
7.1
System Handling
The 9d System supports the GAP (Generic Access Profile) standard. This makes it possible
to log on to any GAP compatible system with your handset.
7.1.1
Register a New PBX System
You can register up to four different PBX systems on your handset. To register you have to
enter the authentication code related to the system you are logging on to.
Note:
To avoid deleting a registered system accidentally, a parameter can be set in the SIM
card that makes it impossible for the normal user to delete a system.
When you have registered more than one system, you can manually select which system
to connect to, see
6.5.19
Select PBX System
on page 34.
Register
1
Enter registration mode.
Enter the menu and use Navigation key (left/right) to select the Settings tab and
press the Navigation key (down) to enter “Settings”. Use Navigation key (down),
step to “System” and press Navigation key (right). Select “Register” and press
Navigation key (right). The PBX system you are logged on to is marked. Step to the
next available PBX system, system A, B, C or D and press “New”.
Tip
: There is a quick access code you can use to enter the register mode directly
without using the menu. The quick access code is *#73#.
2
The IPDI code is displayed. The GAP identity number for the SIM card can be
required in some PBXs.
When registering to an Alcatel PBX with software version 5.1 or earlier, it is
necessary to select which type of communication protocol that should be used with
the PBX. Therefore, it is possible to force the handset to different types of PBXs:
• A long press on ’1’ forces the handset to Alcatel GAP.
• A long press on ’2’ forces the handset to Alcatel 4072+.
• A long press on ’3’ forces the handset to Ascom Tateco GAP.
The long press is confirmed with a beep.
Press “Ok”.
