ASCOM 9d24 MkllMessenger, Руководство пользователя

Страница: 15 / 52

PRELIMINARY
TD 92333GB
2006-03-20/ Ver. PA8
User Manual
9d24 Mkll Cordless Telephone
10
3 Operation
3.1 Basic Operation
3.1.1 Call List
The twenty last received/dialled telephone numbers are stored in a call list. Open the call
list by pressing the Navigation key (down), or from the menu, see
6.2 Contacts on page
26. If the clock and date function is set, you can on the same day the call was received/
dialled, see the time for the call. The time stamp is changed to a date stamp the following
day.
3.1.2 Make a Call
Note: The headset answering button is only active during a call or when the telephone is
ringing and can thus not be used to get the line when making a call.
Pre-dial
Enter the number and press the Call key to get the line. The number is shown on the
display while dialling. If needed, you can press the Soft key “C” to erase and edit the
number. By using Navigation key (left/right) it is possible to step and add/delete a digit in
the middle of a number.
It is possible to turn on/off the tone sender in a predialled number by making a long press
on the *-key. Tone sender on will be indicated with a “T” in the number and off with “-”.
If a pause is required in the number, it is added by making a long press on the #-key. The
pause is indicated with a “P” in the number.
Post-dial
Press the Call key to get the line and enter the number. The number will not be added to
the call list when post-dial is used.
Dial using a pre-programmed Hot key or Soft key
A Hot key or Soft key can be programmed with a telephone number. Press the pre-
programmed Hot key or Soft key. The call will automatically be connected.
Dial a number from the Call list
Enter the call list with Navigation key (down), or from the menu. Select a number and
press the Call key.
The number in the call list can be edited before the call is started. Press “Edit”, make the
changes and press the Call key.
Dial a number from a Message
You can dial a number included in a received message by pressing the call key. The first
number in the message is dialled. If the message is stored in the message list, open the list
by pressing Navigation key (up). Select the message and press the Call key.