PRELIMINARY
TD 92333GB
2006-03-20/ Ver. PA8
User Manual
9d24 Mkll Cordless Telephone
15
Open an Interactive Message the same way as an ordinary message. If the IM gives you
several options, mark the one you want and press “Select”. If the selected option requests
input, enter the information needed and press “Ok”. A press on the middle soft key will
change to digit input mode to facilitate entering numbers.
Interactive Messaging is a system dependent function.
3.5
Mobile Data
Note:
9d24 Mkll Messenger and 9d24 Mkll Protector only.
3.5.1
Send Mobile Data
It is possible to send user entered data from the handset by pressing a pre-programmed
Hot key or Soft key, or selecting a Service. Mobile data can be used for opening a door,
starting/stopping a machine etc. The data can either be predefined, or entered after the
Hot key/Soft key is pressed or Service is selected.
The data can be predefined when programming the Soft/Hot key or Service, see
6.5.8
Edit
a Soft key
on page 32 or
6.4.3
Edit a Service
on page 30.
3.5.2
Send Mobile Data with a Prefix
Mobile data with a prefix is sent from the handset by entering data and then pressing a
pre-programmed Hot key or Soft key or select a Service. Mobile data with prefix can be
used to send information to an application in the system. The prefix is predefined by the
user when programming the Hot/Soft key or Service, see
6.5.8
Edit a Soft key
on page 32
or
6.4.3
Edit a Service
on page 30.
3.6
Conference Call
A conference call is indicated by a different signal compared to normal calls and a text
message. The conference call must be answered within a pre-set time (default 30
seconds). A normal call in progress has higher priority, but if the normal call is ended
before the pre-set time, the conference call indication starts and the call can be answered.
Answer a Conference Call
Press the Call key to answer. The Cordless Handset is now dialling a dial-code and is
connected to the group conference.
3.7
Push-to-talk
There are two different types of push-to-talk functions that are set by SIM card parameters
in the handset. For both variants the Mute button has to be pressed during conversation.
The first push-to-talk function can be described as a group call/conference call. To enter
the group call the members must press a Soft/Hot key with a pre-programmed dial-code. If
one of the group members wants to get in contact with the others, he/she simply presses
and holds the Mute key to open the microphone. The microphone is muted again when
the Mute key is released. The dial-code is set in the Soft/Hot key as a “Phone number”. To
set the “Phone number” see chapter
6.5.8
Edit a Soft key
on page 32.
Note:
When this function is enabled all calls started with a soft key or hot key will be
using the push-to-talk function.
