ascobloc ASCOLINE 700 AEH 2 Series, Руководство по эксплуатации

Страница: 12 / 15

Operating instructions Ascoline 700, AEH 55x
ascobloc
Gastro-Gerätebau GmbH 01156 Dresden, Grüner Weg 29 Germany
Tel.: +49 351 4533-0 Fax +49 351 4537-339 E-mail: service@ascobloc.de AEH 55x_d.doc, latest version: 22/05/2014
Subject to change without notice!
11
7.2 Fault rectification
Always disconnect the power plug before starting any repair work!
Fault Cause Remedy
No heating
(control lamp is off)
-No current
-Rotary power knob in OFF position
OFF position
-Pot too small
(minimum diameter 12 cm)
-Pot is not in centre of the
cooking zone
(pot can thus not be detected)
-Unsuitable pot material
-Induction appliance is faulty -Check power supply
-Switch on rotary power knob
-Check pot size
-Check placement
-Check material
-Replace appliance
Inadequate heating
performance (control lamp
is on)
-Pot material is not ideal
-Air cooling system is obstructed
-Air filter is fouled
-Surrounding temperature is
too high
-One phase has failed
-Induction appliance is faulty
-Use suitable pot material
-Check air cooling system
-Clean air filter
-Check the phases
-Replace induction device
No reaction to turning the
rotary power knob
-Rotary power knob is faulty -Replace rotary power knob
Heating goes on and off
within minutes (fan is
working)
-Air cooling system is obstructed
-Fan is dirty -Check air cooling system
-Clean fan
Heating goes on and off
within minutes
(Fan is not working)
-Fan or fan monitoring is
faulty
-Replace fan
Heating goes on and off
within minutes (after
longer, continuous
operation)
-Coil is overheated
-Cooking utensil is empty
-Overheated food in the pot
-Cooking zone is too hot
-Check air cooling system
Small metal objects (e.
g. spoons or knives) are
being heated up on the
cooking zone
-Pot detection not properly set
-Set the pot detection as in the
instructions
A repair may only be performed by trained, qualified specialists. Please give us the appliance number
and the type designation that are on the appliance type plate. The plate is located on the front cover A
of the appliance (see connection diagram).
7.3 Customer service
ascobloc Customer Service: Tel. +49 351 4533–384
Fax +49 351 4533–379
E-mail kundendienst@ascobloc.de