Operating Instruction Ascoline 850, MEH 2xx, 4xx, 6xx
ascobloc
astro-Gerätebau GmbH
01156-Dresden, Grüner Weg 29
Deutschland
Tel. : (0351)4533-0
Fax (0351)4537-339
E-Mail:
MEH2xxff_e.doc, Stand: 18.1.2012
Subject to change without notice!
7
7 Faults and their Rectification
7.1 Disconnect the appliance from power supply before starting any maintenance!
Fault
cause
Solution
Sinal lamp green lights but no
heating
Heating elements, switch are
damaged, ore 1 phase is not
connected
Parts with error has to be changed
No heat emission on baking
oven
Green signal lamp lights,
but no heat emmission
Network connection
interrupted
Fuse from others broken
Heating element broken
Check, Refresh connection
Check, Replace/ Switch on Fuse
Replace heating element
Fuse switch off again and again
Wrong fuse protection or short
circuit
Check, Replace or repair
Steel plate and control panel will
be very hot
Cross-flow-radiator out of
order, do not continue use of
range,
replace cross-flow-radiator
Baking oven door do not close
properly
Spring power not enough
Set the spring stronger
Baking oven leakable
Gasket worn out
Replace gasket
Green signal lamp do not light
after swich on
Network connection
interrupted, fuse broken, signal
lamp damaged
Check anf replace broken part
Tube Heating element
For upper Heating is loose-fitted
Holder for Heating element not
proper installed
Fix it new again
In case of any fault or for spare parts please inform us about the Type and the Unit-No., which you will
find on the unit label on the front panel.
Repair only by authorized personal.
ascobloc customer service:
Tel.
+49 (0)351/45 33 – 384
Fax
+49 (0)351/45 33 – 379