Asco 950 Скачать руководство пользователя страница 6

Страница: 6 / 16

IO-70071

01/2020

For access to self-service tools and chat support visit se.com/us/en/work/support or call 1-888-778-2733 for technical assistance

ASCO Model 950 Surge Protective Device (SPD) and Fuse Box

Introduction

HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH

• Proper installation is required to maximize performance. Please follow

steps outlined herein.

• Read this Installation, Operation & Maintenance Manual in its entirety

prior to beginning installation.

• These instructions are not intended to replace national or local codes.

Follow all applicable electrical codes.

•

Installation of the Model 950 should only be performed by qualified

electrical personnel familiar with 1kV to 5kV systems.

Failure to follow these instructions will result in death or serious injury.

Thank you for choosing an ASCO Surge Protective Device (SPD). This is a

high quality, high energy surge current diversion system designed for use

with equipment that is sensitive to damaging transient voltage surges.

Proper installation is important to maximize performance. Please follow

steps outlined herein.

This Installation, Operation & Maintenance Manual should be read in its

entirety prior to beginning installation. These instructions are not intended

to replace national or local codes. Follow all applicable electrical codes to

ensure compliance. Installation of the Model 950 should only be performed

by qualified electrical personnel familiar with 1kV to 5kV systems.

ASCO’s Medium Voltage SPDs are extensively tested in accordance with

industry standards such as ANSI/IEEE C62.11.

This unit is a Single-port Parallel-connected Three Phase Fuse

Box designed for installation on medium voltage (1000V up to 4160V) switch

gear at service entrance and downstream applications for IEEE Category C,

B, or A locations.

DANGER

Introduction

General Information

Product Family Outline

Note:

For access to self-service tools and chat

support visit se.com/us/en/work/support or call

1-888-778-2733 for technical assistance

Model 950 – Medium Voltage Surge Protective Three Phase Fuse

Box

The 950 consists of a Medium Voltage Parallel SPD and stand-alone, Three

Phase Fuse Box. The 950 is designed for Oil & Gas, Water/Wastewater,

Chemical, Large Industrial & Heavy Duty Applications at Service Entrance,

Distribution locations as well as Individual Equipment. The Three Phase

Fuse Box component of the 950 is REQUIRED to be installed on the line-

side of, and in-line with, the medium voltage SPD component as dedicated

overcurrent protection and to disconnect the SPD from the electrical system

in the event the SPD reaches end of life. The 950 comes available in 5

voltages & 120 or 240kA per phase. See Model Number Decoder in Table 1.

Содержание 950

















Результаты поиска

Содержание 950

Отзывы:

Asco 950, Руководство по установке и эксплуатации, Страница: 6 / 16

Результаты поиска

Содержание 950

Отзывы: