ASCHER RACING SIMUCUBE F64 Series, Руководство по эксплуатации продукта

Страница: 10 / 16

10 | p a g e
6.2. Normal Operation
First switch ON the Simucube wheel base and then the wireless wheel. If step 2 (automatic connection
mode) is enabled the wheel will connect automatically.
A successful connection is indicated by:

green connection LED blinks 3 times
 Simucube plays a beep sound (if audible notifications are enabled)

steering wheel shows up in the True Drive overview tab
The wheel can also be connected by using the paddle shifters in case it’s already switched ON:

pull both shifters to connect immediately

pull both shifters for 5s to disconnect
Automatic disconnect: The wheel will disconnect automatically after 1h of inactivity to safe energy in
sleep mode. Activity is monitored by the following conditions:

turning the wheel for more than 10°

FFB effects in use

pushing any button on the wireless wheel
6.3. Configure Analog Inputs
Both analog paddles can be either set-up as individual axis (e.g. throttle and brake) or as combined
axis, called dual clutch. This mode compares the output of both axis and uses the momentarily greater
value. Additionally, one clutch is defined as master (m) - the other one as slave (s) with scaled down
output.

master: 100% physical movement = 100% output

slave: 100% physical movement = bite-point setting , e.g. 50% output
If the bite-point is set to 100%, both clutches can be used equally.
Dual clutch functionality offers several advantages; the desired bite-point can be reached:

immediately , within milli seconds (by letting go the master and keeping the slave clutch pulled)

precisely , adjust the value up to 0.1% precision

repeatedly , the exact same value every single time