IRD1560 Decoder User Manual
Note
•
IRD1560 supports maximum 2 channels of analog stereo audios output
simultaneously.
•
When the program users choose to decode and output has only one audio channel,
users need to configure Primary Audio Chanel (‘Audio 1 Mode’ and ‘Audio 1 Select’)
only.
•
5.1 channel audio can only be resume via HDMI and SDI interfaces. When users
choose HDMI or SDI as the output interface and output 5.1 channel audio, users
need to select ‘5.1 Channels’ under ‘Audio 1 Mode’ and set ‘Audio 2 Select’ off.
After finishing the configuration, click
to confirm.
Parameters
→
IP Stream:
This unit supports TS output in IP (1 MPTS & 8 SPTS). Click “IP Stream” and it displays the
interface where users can configure the MPTS & SPTS out parameters. (Figure 4-13)
It displays all the input
programs. Select one
program here to decode
and output.
To set the video and audio
parameters for the program
to be decoded
Primary Audio
Secondary Audio
Solutions Provider for FTTx, RFoG, and HFC
www. ascentcomtec.com
Page 39 of 46
