IRD1560 Decoder User Manual
Mux Program:
Users can parse the Tuner input program list and select program(s) to mux out in this menu.
Note
Multiplexing operation can only take effect on condition that the “TS output mode” is
set to “Mux” under ‘TS Config’. (i.e.: TS Config
→
TS output mode
→
Mux)
ASI:
Users can parse ASI input programs and select program(s) to mux out under this menu. The
operating method is same with what explained above.
3: ASI
TS Lock
Parse Program
Select Program
Mux Program
TS Lock
Parse Program
Select Program
TS Locked
Bitrate: 4.040 Mbps
Searching Program
Get 7 Programs
For reading the input
bitrate
For reading the
number of programs
from Tuner 1 (or 2)
Mux Program (
0/7
)
1: CCTV 1
X
‘1/7’ represents there are all 7 programs in the list and 1 program has been selected to mux out through ASI.
Mux Program (0/7)
1: CCTV 1 [
←
]
Mux Program (0/7)
1: CCTV 1 [
→
]
Mux Program (
1/7
)
1: CCTV 1
√
Process of selecting programs to
output through front panel:
[
←
]: to cancel program output;
[
→
]: to output the program
“
√
”: a symbol indicating the
corresponding program has been
selected to output;
“X”: a symbol indicating the
corresponding program has
not
been selected to output
Press ENTER key
Press RIGHT/LEFT
key to shift arrow
Press ENTER key to
confirm
Solutions Provider for FTTx, RFoG, and HFC
www. ascentcomtec.com
Page 19 of 46
