IRD1560 Decoder User Manual
ON ID:
Users can set ON ID (original network ID) in this menu.
Users can press ENTER key to enter ‘Decoder’ to set the video to be decoded. IRD1560 IRD
supports one channel program to output at various interfaces at the same time
(HDMI/SDI/CVBS/YPbPr).
Note
Audio 1: Primary Audio Chanel; Audio 2: Secondary Audio Channel
•
IRD1560 supports maximum 2 channels of analog stereo audios output
simultaneously.
•
When the program users choose to decode and output has only one audio
channel, users need to configure Primary Audio Chanel (‘Audio 1 Mode’ and
‘Audio 1 Select’) only.
•
5.1 channel audio can only be resume via HDMI and SDI interfaces. When users
choose HDMI ro SDI as the output interface and output 5.1 channel audio,
users need to select ‘5.1 Channels’ under ‘Audio 1 Mode’ and set ‘Audio 2
Select’ off.
ON ID
00001
Decoder
►
Video Format
Audio 1 Mode
Audio 1 Select
Audio 2 Mode
Audio 2 Select
CC Enable
Subtitle
Tele text
AC3 pass
Volume
Search Program
Program Select
Rom Version
Decoder Status
To search out the input program list and
select one to decode and output.
To read the rom version and
decoding status
To set video/audio
parameters for the
output program
Solutions Provider for FTTx, RFoG, and HFC
www. ascentcomtec.com
Page 24 of 46
