After finishing with parameters setting, click the
button on the toolbar to save the
modifications to the device’s flash.
When logging in, users will note that the default user name is
admin
with no password. Additional users
and passwords can be added as needed.
Click
Setting
in the menu bar and select
User Setting
in the drop-down list to open the dialog box
shown below. Select
Edit Information
by marking the check box with
“
√
”
and input the new username
and new password as prompted below. Click
to add the new user and then click
to save the new settings.
Solutions Provider for FTTx, RFoG and HFC www.ascentcomtec.com
Page 41 of 43
