►
3.1 IP out Enable
[ YES] NO
3.2.3.2
IP Out Address
If users enable the IP output function, then users can set the device IP output address in this interface.
After users press the
ENTER
key, the operating interface will display the following page:
►
3.2 IP Out Address
224.002.002.002
3.2.3.3
IP Out Port
In this menu, users can set the encoder IP output port number by pressing the
ENTER
key to enter the
main editing interface.
►
3.3 IP Out Port
01001
3.2.3.4
Trans Stream ID
Users can set the device TS ID in this interface after pressing the
ENTER
key to enter the main editing
page.
►
3.4 Trans Stream ID
00000
3.2.3.5
Output Stream
Users can modify the output stream bit rate in this interface after pressing the
ENTER
key to enter the
main editing page.
3.2.3.6
ASI Output
Users can set the ASI output in the interface under this menu. There are 5 options: MPTS and Channels
1-4.
3.5 Output Stream
040.000 Mbps
Solutions Provider for FTTx, RFoG and HFC www.ascentcomtec.com
Page 20 of 43
