►
5 Saving Config 6 Loading Config
7 Version
（
SNMP
）
8 Language
The option with “
►
” is the current selection. Users can press the
ENTER
key to enter the specified
submenu to modify device parameters.
Under this menu, users can enter the corresponding encoding channel to set the relevant audio and
video input parameters, and select programs to multiplex. The LCD will display 4 submenus from
Encoding Channel 1 to Encoding Channel 4. The setting principle is the same for Encoding Channels 1-4,
so this manual only explains the process for one channel. After pressing the
ENTER
key, the LCD will
display the following page:
►
1.1 Encoder 1 1.2 Encoder 2
1.3 Encoder 3 1.4 Encoder 4
After users enter a submenu, they can enter the corresponding interface to modify device parameters.
►
1.1.1 Video 1.1.2 Audio
1.1.3 System 1.1.4 PG Muxer
3.2.1.1
Video Settings
►
1.1.1.1 Bitrate 1.1.1.2 BitrateMod
1.1.1.3 Profile 1.1.1.4 Level
Bitrate
By pressing the
Enter
key, users can modify relevant encoding rate parameters (adjustable range:
0.8M ~ 19M), the specific steps are displayed as follows:
1.1.1.1
Bitrate
8.000Mbps
Solutions Provider for FTTx, RFoG and HFC www.ascentcomtec.com
Page 14 of 43
