ASCEL Electronic AE20125, Руководство по сборке и эксплуатации

Страница: 47 / 52

USB Driver Installation
The driver for the virtual serial port must be installed before
the software can be used. Drivers for all supported operating
systems are included with the device. They can be found in the
"Driver" directory on the CD.
Note: Newer Windows OS (starting with Windows 7) can install the driver automatically, if an
Internet connection is present.
Note: You can change the number of the COM Port assigned by Windows after the first
connection is made, by going to Control Panel / Device Manager and selecting the port. Select
Properties / Port Settings / Advanced and assign a new number. It will remain even after the
device is disconnected and connected again later.
Software Installation
The PC software can be found in the "Software" directory.
Execute setup.exe to install the software. There is also a
portable version of the software in the "Portable Software"
directory that does not require installation.
Note: The .NET-Framework (at least version 4.0) must be installed prior to the software
installation.
Note: The USB driver is initialized on first connection. The software may not respond for a few
seconds at this time.
40