ASCEL Electronic AE20125, Руководство по сборке и эксплуатации

Страница: 37 / 52

4.3 ENABLED
Enables or disables the PLL frequency indication. If enabled, it
is shown in the bottom display line, below the output
frequency.
5 Presets
The AE20125 is capable of storing five presets, each consists
of an output frequency and a waveform. To save a preset, first
set the frequency and waveform as desired. In the main menu,
select
SAVE SETTINGS
then. Select a position (1-5) to save the
preset and press
FUNCTION/Enter
. The settings are saved.
To load a preset, select
LOAD SETTINGS
and the appropriate
position in the load menu. Press
FUNCTION/Enter
to load this
preset.
Note: The saved presets are kept in non-volatile memory.
Note: The frequency and waveform at start-up can be set
separately, see the next chapter.
6 Settings
6.1 STARTUP FREQ
The start-up frequency.
Note: The maximum frequency depends on the waveform set in
STARTUP WFORM
and equals the maximum output frequency
for the particular waveform.
30