ASCEL Electronic AE20125, Руководство по сборке и эксплуатации

Страница: 35 / 52

3.1 START FREQ
The start frequency of the sweep cycle.
3.2 STOP FREQ
The stop frequency of the sweep cycle. If it is lower that the
start frequency, the sweep runs "backwards" (from the higher
to the lower frequency).
3.3 SWEEP FREQ
The sweep frequency can be adjusted between 0.1 Hz
(equivalent to 10 sec sweep cycle duration) and 10 Hz (0.1 sec
sweep cycle duration or 10 sweep cycles per second).
3.4 SWEEP MODE
This setting controls the behavior after a sweep cycle is
complete.
LOOP
restarts the cycle again with the start
frequency,
SWING
lets it run back from the stop to the start
frequency.
28