ASBER ABBC-23-S/SG, Руководство по установке, использованию и обслуживанию

Страница: 10 / 20

ASBER – BAR EQUIPMENT: Operations and Service Manual/ Rev. JUN. 2015
PAGE 10
No provision is made for rapid cooling of a keg which has become too warm. When
purchasing your keg of beer, you can wrap the keg in a blanket or other insulation to
help it cool prior to installing in the cooler.
4.4 LOCATION
Units represented in this manual are intended for indoor use only. Be sure the location chosen
has a floor strong enough to support the total weight of the unit and contents. For the most
efficient operation, be sure to provide good air circulation inside and outside of the unit.
THE MACHINES NEEDS TO BE INSTALLED 2 FEET AWAY FROM ANY
HEAT SOURCES
.
Inside cabinet:
The first cleaning must be made when you unpack the unit and before switching it on. Clean it
with water and a mild detergent. When it is clean and dry, insert the accessories in the
appropriate places, for the best use of the user.
Outside cabinet:
Be sure the unit has good air circulation around it. Avoid hot corners and locations near stoves
and ovens. It is recommended the unit be installed no closer than 2” from any wall. The place
where the refrigerator is placed must be open and clean, avoiding that de fan of the condensing
unit absorbs materials which are deposited then into the condenser blades and coil, which can
produce failures.
4.5 DATA PLATE
The data plate in located inside the unit, near the top front left corner. Under no circumstances
should the data plate be removed from the unit. The data plate is essential to identify the
particular features of your unit and is of great benefit to installers, operators and maintenance
personnel. It is recommended that, in the event the data plate is removed, you copy down the
essential information in this manual for reference before installation.
SERIAL NUMBER FOR THE
EQUIPMENT
(8 digits and ends in “M”)
Model
Electricals
Refrigerant Type