manualshive.com logo in svg

Asante IntraCore 36000 Series, Руководство пользователя

Поделиться
Скачать
Asante IntraCore 36000 Series Скачать руководство пользователя страница 92

92 

Asanté IntraCore 36000 Series 

Console(config)#

interface ethernet 1/6

 

Console(config-if)#

lacp

 

Console(config-if)#

end

 

Console#

show interfaces status port-channel 1

   

Information of Trunk 1 
 Basic information: 
  Port type: 1000T 
  Mac address: 22-22-22-22-22-2d 
 Configuration: 
  Name: 
  Port admin status: Up 
  Speed-duplex: Auto 
  Capabilities: 10half, 10full, 100half, 100full, 1000full, 
  Flow control status: Disabled 
  Port security: Disabled 
  Max MAC count: 0 
  Port security action: None 
  Combo forced mode: None 
 Current status: 
  Created by: Lacp 
  Link status: Up 
  Port operation status: Up 
  Operation speed-duplex: 1000full 
  Flow control type: None 
  Member Ports: Eth1/1, Eth1/2, Eth1/3, Eth1/4, Eth1/5, Eth1/6, 
Console# 

7.4.1 Configuring LACP Parameters 

Dynamically Creating a Port Channel 

Ports assigned to a common port channel must meet the following criteria: 

•

 

Ports must have the same LACP System Priority. 

•

 

Ports must have the same LACP port Admin Key. 

•

 

If the “port channel” Admin Key is set (

lacp admin-key

 command), then the port Admin Key must be set 

to the same value for a port to be allowed to join a channel group. 
 

Note:

 If the port channel admin key (

lacp admin-key

 command) is not set (through the CLI) when a 

channel group is formed (it has a null value of 0), this key is set to the same value as the port admin key 
used by the interfaces that joined the group (

lacp admin-key

 command as described in Chapter 16). 

Command Attributes  

Set Port Actor – This menu sets the local side of an aggregate link; For example, the ports on this switch. 

Port – Port number. (Range:1-24, 1-48) 

System Priority – LACP system priority is used to determine link aggregation group (LAG) membership, and 
to identify this device to other switches during LAG negotiations. (Range: 0-65535; Default: 32768) 

•

 

Ports must be configured with the same system priority to join the same LAG. 

•

 

System priority is combined with the switch’s MAC address to form the LAG identifier. This identifier is 
used to indicate a specific LAG during LACP negotiations with other systems. 

Содержание IntraCore 36000 Series


































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды