manualshive.com logo in svg

Asante IntraCore 36000 Series, Руководство пользователя

Поделиться
Скачать
Asante IntraCore 36000 Series Скачать руководство пользователя страница 78

78 

Asanté IntraCore 36000 Series 

Command Attributes 

Action – An ACL can contain all permit rules or all deny rules. (Default: Permit rules) 

Source/Destination MAC – Use “Any” to include all possible addresses, “Host” to indicate a specific MAC 
address, or “MAC” to specify an address range with the Address and Bitmask fields. (Options: Any, Host, 
MAC; Default: Any) 

Source/Destination MAC Address – Source or destination MAC address. 

Source/Destination MAC Bitmask – Hexadecimal mask for source or destination MAC address. 

VID – VLAN ID. (Range: 1-4094) 

VID Mask – VLAN bitmask. (Range: 1-4094) 

Ethernet Type – This option can only be used to filter Ethernet II formatted packets. (Range: 600-fff hex.) 

A detailed listing of Ethernet protocol types can be found in RFC 1060. A few of the common types include 
0800 (IP), 0806 (ARP) and 8137 (IPX).  

Ethernet Type Mask – Protocol bitmask. (Range: 600-fff hex.) 

Packet Format – This attribute includes the following packet types: 

•

 

Any – Any Ethernet packet type. 

•

 

Untagged-eth2 – Untagged Ethernet II packets. 

•

 

Untagged-802.3 – Untagged Ethernet 802.3 packets. 

•

 

Tagged-eth2 – Tagged Ethernet II packets. 

•

 

Tagged-802.3 – Tagged Ethernet 802.3 packets. 

Configuring Switch Using the Web or CLI  

Web 

Specify the action (For example, Permit or Deny). Specify the source and/or destination addresses. Select 
the address type (Any, Host, or MAC). If you select “Host,” enter a specific address (e.g., 11-22-33-44-55-
66). If you select “MAC,” enter a base address and a hexadecimal bitmask for an address range. Set any 
other required criteria, such as VID, Ethernet type, or packet format. Then click Add. 

 

Jaci need pic here 3-30 Need breen to help 

CLI 

This rule permits packets from any source MAC address to the destination address 00-e0-29-94-34-de 
where the Ethernet type is 0800. 

Console(config-mac-acl)#

permit any host 00-e0-29-94-34-de ethertype 0800

   

Console(config-mac-acl)# 

Содержание IntraCore 36000 Series


































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды