INS
TRUC
TIONS
EN
USE OF THE SEATBELT
The rocker has a five-point belt mounted on the product. Always make sure to
fasten the seatbelt and secure your child when using the baby rocker.
To close the seatbelt, insert both side parts of the seatbelt into the buckle centre
until it audibly engages with a “clicking sound”.
Make sure that the tension is correct and the seatbelt fastening is proper. Adjust
the seatbelt length.
To open the seatbelt, press the knob in the buckle centre, thereby the seatbelt side
parts open automatically and you can pull your child from the seatbelt.
5
and secure your child when using the baby rocker.
To close the seatbelt, insert both side parts of the seatbelt into the buckle centre until it audibly
engages with a “clicking sound”.
Make sure that the tension is correct and the seatbelt fastening is proper. Adjust the seatbelt
length.
To open the seatbelt, press the knob in the buckle centre, thereby the seatbelt side parts open
automatically and you can pull your child from the seatbelt.
Use of the seatbelt
5
The cover can be removed from the rocker for cleaning. Bring the rocker into the topmost position.
Remove the seat strengthener by opening the zip at the back of the seat and then remove the
strengthener. Now open the zip at the foot part and then pull the cover carefully over the back rest.
CAUTION: The cover must not be cleaned with chemicals. Observe the care and cleaning instruc -
tions in this manual.
To put the cover back on the rocker, connect the cover with the lower half of the frame by closing
the zip. In order to pull the cover above the back rest, you must bring the back rest in a 45° positi -
on. To do that, hold both the lever on the back rest and the knob on the frame side down and fold
the rest to the front into the corresponding position.
Now pull the cover above the back rest over the adjusting lever. Fold the back rest back until it
audibly engages and the cover is taut. Now re-insert the seat strengthener into the opening at the
back of the seat and close the zip.
Removing the cover
6
To adjust the back rest inclination, operate the lever on the back rest and position it in the desired
position. The back rest can be set to 3 positions.
Back rest adjustment
4
REMOvING THE COvER
The cover can be removed from the rocker for cleaning. Bring the rocker into the
topmost position. Remove the seat strengthener by opening the zip at the back of
the seat and then remove the strengthener. Now open the zip at the foot part and
then pull the cover carefully over the back rest.
CAUTION: The cover must not be cleaned with chemicals. Observe the care and
cleaning instructions in this manual.
To put the cover back on the rocker, connect the cover with the lower half of the
frame by closing the zip. In order to pull the cover above the back rest, you must
bring the back rest in a 45° position. To do that, hold both the lever on the back
rest and the knob on the frame side down and fold the rest to the front into the
corresponding position.
Now pull the cover above the back rest over the adjusting lever. Fold the back
rest back until it audibly engages and the cover is taut. Now re-insert the seat
strengthener into the opening at the back of the seat and close the zip.
6
