Asada CLEAR SCOPE 2820, Инструкция по эксплуатации

Страница: 22 / 24

CLEAR SCOPE 2820
MAINTENANCE & INSPECTION
DANGER
◆Only qualified persons are allowed to disassemble the device.
There is a high-voltage part in the Display Unit, and it is very dangerous.
◆Do not modify the device.
● Inspect and clean regularly as instructed below and perform correction or replacement timely.
＊Check to see if there is no scratch or crack in any part of the device.
＊Check to see if all moving parts move normally.
＊Wipe the device clean with a dry soft cloth. If it is very dirty, wipe it with
a tightly wrung out wet cloth and then wipe it again with a dry cloth.
＊Clean the device after use and store in the provided Case.
＊When the lens is not clean, wipe it carefully with a soft cloth or the provided swab
impregnated with a small amount of alcohol.
CAUTION
◆After use, do not leave the device stained with soil, sand, water and so on.
It may lead to rusting and may damage the device.
◆Do not put organic solvents such as gasoline or thinner.
The device may be damaged.
◆Do not expose the LCD Monitor and the switches to water.
Although the Camera Head and the Camera Cable are waterproof, the LCD
Monitor and the switches are not waterproof.
◆The device should be stored in dry or locked-up place – out of reach of
children.
◆Do not store the device along the eaves where it may be exposed to rain.
◆Avoid direct sunshine when stored.
WARNING
◆When cleaning or servicing, switch off and unplug the device.
Otherwise, you may get electric shocked.
保
守
・
点
検
22