Asada CLEAR SCOPE 2820, Инструкция по эксплуатации

Страница: 15 / 24

CLEAR SCOPE 2820
◆Do not pull the Camera Cable by force.
The Camera Cable may be broken or bent.
◆Do not hold the Camera Cable at far distance from the insertion opening when
inserting Camera Cable.
If the Camera Cable is bent too much, it may be broken.
◆The minimum bent radius of the Camera Cable is
110mm. It will be broken when the bent radius is less than 110mm.
As the Camera Cable cannot be repaired, the broken cable should
be replaced with a new one which is charged. Pay much
attention for its handling.
◆Do not push the lens hard.
◆Do not leave the device keeping the lens pointed towards the sun.
It may be damaged due to light condensing. Be careful when the device is placed
outside or by the window.
◆Depending on the object and/or the environment, the color on the monitor
may be different from the real one or the image may not be clear.
It is due to the performance of the device and not a trouble.
◆The image may not be clear due to mist on the lens when used under
the conditions of different temperature.
◆The image may not be clear when the Camera is in water or liquid.
◆The image of the object is not clear when it is out of the focus area.
◆The image may be brighter or darker due to the automatic exposure function.
◆The image may be noisy to keep the brightness of the LCD Monitor under
low light condition or when the LED is dark.
◆ Keep CLEAR SCOPE away from sand, dirt, water and so on.
The device may be damaged when they enter inside.
◆After use, remove the dirt and water on the Camera Cable and then close
the case in dry conditions.
CAUTION
15