AZ800 user manual - hardware
Created by: MPuchner 07.2019
version: 9600021A
Original user manual
page 46 of 68
printed: 04.03.2020
You can lay your cables through the cable inlets (brush holes) in the fork arms. Then lay them through the
azimuth axis and to the outside through the brush hole in the base plate.
Figure 41 - user specific wiring
Consider that the camera (and other devices) rotates by 90° with the elevation axis. The
movement can be even more if a derotator is used. Leave your cables long enough so that there
is no tension on the cables when the telescope or derotator moves.
Only use cables that are suitable for flexible use considering your local operating temperatures!