manualshive.com logo in svg

AS MOTOR WeedHex AS 50, Руководство оператора

Поделиться
Скачать
AS MOTOR WeedHex AS 50 Скачать руководство пользователя страница 2

2

dummy

Notes on the operating
manual

Dear customer,

Congratulations on your purchase. You have
acquired a reliable quality product by
”AS-Motor Germany”.

This product has been manufactured according
to modern manufacturing methods and com-
prehensive quality assurance measures. Only
when you are satisfied with your device have
we attained our goal.

These operating instructions contain important
information to help you avoid hazards and to
increase the reliability and the life span of the
device.

Read the operating instructions
before using the device. Share
these operating instructions and
the operating instructions of the
engine with other users of the
device.

Contact

If you have questions about your device,
please contact your customer service.

For international AS partners, please see:
www.as‑motor.de.

Device data

Please fill in all data referring to your device.
When ordering spare parts, provide your
dealer with the serial and engine numbers.

Serial number (see manufacturer’s certificate
or type plate):

Engine number:

Date of purchase:

Address of dealer:

Intended use

The device is exclusively intended for cleaning
paved areas and edges where moss and
weeds are growing.

Only use attachments and cutting tools autho-
rised by “AS-Motor Germany”.

Any other use exceeding this purpose is inad-
missible.

Observe the instructions chapter for Mainten-
ance. Otherwise, operational safety is en-
dangered.

The user of the device is responsible for acci-
dents or damage that can happen to other per-
sons or their property.

The device shall in particular 

not

 be used

– on public roads.

– as drive unit for work tools and any type of

tool sets that are not authorised by “AS-Mo-
tor Germany”.

– for sweeping and mowing unpaved areas.

Содержание WeedHex AS 50





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды