manualshive.com logo in svg

AS MOTOR WeedHex AS 50, Руководство оператора

Поделиться
Скачать
AS MOTOR WeedHex AS 50 Скачать руководство пользователя страница 15

15

Adjusting pressure of brushes

3

1

2

1.

Place the device in a place that is not
sensitive.

2.

Start the device.

3.

Press the central adjusting lever on the
star grip (

1

) downwards into the drive slot

(

2

).

4.

Turn the star grip to adjust the height of
the brushes and thus the contact pres-
sure. The entire engine with the brushes
is moved up or down. On the scale (

3

) the

currently set height and the adjusting area
is displayed.

5.

Test the setting on a test area.

Driving

 Warning

Risk of injury caused by tripping or sliding
while pushing the mower, moving it back-
wards and turning it round.

► Make sure that the area is clear of ob-

jects and watch for safe footing.

Driving

Immediately switch off the brushes in case of a
dangerous situation by releasing the engine
brake lever.

Drive on:

1.

Press the drive lever towards the handle-
bar – device is running.

Drive off:

1.

Release the drive lever.

Adjusting speed:

The driving speed can be continuously adjus-
ted with the vario lever.

Adjust the driving speed only when the engine
is running.

Turning

Turning round on an even surface:

1. Switch off the drive.

2. Turn the device to the desired side.

3. Switch the drive back on.

Turning round on a sloping area:

1. Keep the drive switched on.

2. Turn the device upslope.

3. Hold back the handlebar and the inner

wheel.

The drive prevents sliding and supports the
turn manoeuvre.

Содержание WeedHex AS 50





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды