Arzum TRIPPER AR 690, Инструкция по эксплуатации

Страница: 15 / 28

15 ARZUM
SHOT-STEAM
• Press the shot-steam button to generate a
powerful burst of steam that can penetrate
the fabrics and smooth the most difficult and
tough creases. Wait for a few seconds before
pressing again. By pressing the shot-steam
button at intervals you can also iron vertically
(curtains, hung garments, etc.).
VOLTAGE ADJUSTMENT
Voltage adjustment should be made carefully
due to mains electricty of the plug in order to
work seamlessly in foreign countries. NEVER
use your device before adjusting the mains
electricity value.
AFTER USE
• Turn the steam adjustment switch to “close” position.
• Remove the mains plug from the wall socket and wait for the soleplate
in upright position to cool down completely.
• Empty the reservoir by turning the iron upside down and gently
shaking it.
• By pushing the “ PUSH ” button to fold the handle.
CLEANING AND CARE
• Ensure that your iron is disconnected from the power supply and allow
the iron to cool down thoroughly.
• There may be some fabric deposits and other residues on the
soleplate. Those sticky residues can be removed with a damp thick cloth
soaked in a vinegar/water solution. Then wipe off the soleplate with a
dry cloth.
• Do not use abrasive and scratching objects on the soleplate when
cleaning. Avoid hard contact with metal objects.
• Wipe up the outer surface of your iron with a damp cloth, and wipe dry
with a dry one.
•
Never immerse the iron in water or any other liquids.
• Do not put vinegar or chemical calcification removers into the water
tank.
EN