Arzum TRIPPER AR 690, Инструкция по эксплуатации

Страница: 14 / 28

14 ARZUM
FILLING WITH WATER
• Adjust the voltage of the device in accordance with the mail voltage.
• By pushing the
“
PUSH”
button
behind of your
appliance, bring the
handle in the upright
position.
• Adjust the
temperature to “MIN” level. To prevent dripping, slide steam adjustment
to closed. By opening the filling water lid, fill with water in the water tank
and close the lid (capacity is almost 40 ml).
DRY IRONING
• Place your iron in upright position on a flat
surface and plug the power cord.
• For dry ironing, turn the steam adjustment
switch to the position close. As long as this
position, even if the water tank is full, steam
output is blocked.
• Adjust the thermostat adjustment switch by depending on type of
your textile.
• Start the iron getting hot when thermostat indicator light is light up.
When the thermostat indicator light is light off, your appliance will reach
to proper temperature.
STEAM IRONING
• For steam ironing, place the steam
adjustment switch to open.
• Ensure that there is enough water in the
water tank.
• Start the ironing when thermostat indicator
light is turn off.