Arzum IMPRESSO AR 3094, Инструкция по эксплуатации, Страница: 20 / 40

20 ARZUM
automatically expelled into the capsule collection container by opening
the handle.
CAUTION: Never open the handle during brewing cycles.
NOTE: The appliance will enter into the standby mode and all the
indicators will be extinguished if no any operation within 4 minutes after
the appliance finishes brewing coffee. If you want to brew coffee again,
firstly, make sure that the plug is connected well with the power source
and the power switch is at “I” position, and then press any button, after it,
the appliance will continue to brew coffee.
11. If you want to another cup, insert a new capsule for operating.
12. Empty the capsule collection container and rinse the unit and
reservior frequently.
13. Always turn the coffee maker off and disconnect the power supply
when not use.
PREPARING LATTE
1. Fill the detachable water reservior with drinking
water. The water level should not exceed MAX
level marked on the reservior.
2. Put capsule collection container, drip tray and
cup holder grid in place
3. Move the milk reservior by following the arrow
“ ” marked on the milk reservior lid and fill the
milk reservior with milk to the “Latte” mark on
the milk reservior. After it, replace the milk reservior
well on the milk reservior holder by following the
arrow “ ” marked.
4. Open the handle by lifting it and insert a coffee
capsule. Close the handle by pushing it down
directly.
Note: Only use Nespresso compatible capsules for
the appliance.
5. Plug the power cord into the outlet. Press the power
switch to “I” position and then all the indicators start
to flash.
CAUTION: During brewing, never open the handle. Otherwise the coffee
capsule will be expelled into the capsule collection container.
6. Position a container on the cup holder grid. Make sure the drip tray is
assembled in place.