Arzum IMPRESSO AR 3094, Инструкция по эксплуатации, Страница: 17 / 40

17 ARZUM
FOR THE FIRST USE
Check that all accessories are complete and the unit is not damaged.
Add water into water reservior, make sure the handle is closed in place.
Place a container on the cup holder grid, insert the plug, press the power
switch to “I” position and the all the indicators start to flash, wait until
the indicators light steadily, then press the corresponding coffee button,
after a while, the water starts to flow out from the coffee outlet. Once
the desired quantity has been reached, the water will stop flowing out.
Then discard the water. Clean all detachable parts thoroughly with warm
water.
USING YOUR COFFEE MAKER PREPARING
ESPRESSO
1. Fill the detachable water reservior with drinking
water. The water level should not exceed MAX
level marked on the reservior.
2. Put capsule collection container, drip tray and
cup holder grid in place
3. Open the handle by lifting it and insert a coffee
capsule. Close the handle by pushing it down directly.
Note: Only use Nespresso compatible capsules for
the appliance.
4. Plug the power cord into the outlet. Press the
power switch to “I” position and then all the indicators
start to flash.
CAUTION: During brewing, never open the handle. Otherwise the coffee
capsule will be expelled into the capsule collection container.
5. Position a container on the cup holder grid. Make sure the drip tray is
assembled in place.
6. Once all the indicators light steadily, press the large
cup or small cup coffee button according to your
demand, and then its corresponding indicator starts
to flash, after a while, coffee will flow out from the
coffee outlet. Once the desired quantity has been
reached, the coffee will stop flowing out automatically
and the all the indicators will light steadily.
EN