18
ARZUM
• If you desire to stop the boiling function you
can turn the main switch (on/off switch) to the
position “0”.
• When filling the kettle with water,
ALWAYS
remove the appliance from its power base unit.
By doing so, you can prevent the water from
pouring on the table.
• Do not fill with less than 0.5 liter of water (less
than “MIN” indication) or more than 1,7 liter of
water (more than “MAX” indication).
If you attempt to boil a quantity of water below the minimum level or above
the maximum level, the appliance may switch off rather early or the boiling
water may eject from the spout, respectively.
• When not in use, provided that the main switch is turned off “O”, it would be
convenient to allow the appliance to stay continuously plugged in the kitchen.
SWITCHING ON AGAIN
• If you want to re-boil the water make sure that your appliance has
cooled down sufficiently. Should the on/off switch turn to the position “0”
automatically, do not force it to the position “I”. Otherwise, you may damage
to your appliance.
CLEANING
• Before cleaning your appliance, first
ALWAYS
read the instructions in the section “Important
Safeguards”.
BEFORE CLEANING TURN OFF “0” THE MAIN
SWITCH (ON/OFF SWITCH), UNPLUG FROM
OUTLET, AND ALLOW IT TO COOL DOWN.
• Discharge the water from the kettle, and wipe
the outside of it thoroughly with a dry or damp cloth.
•
NEVER
immerse the power base unit and the kettle into water, nor wash
them in a washing dish machine.
• Avoid using abrasive and chemical cleaning agents (liquid bleach,
hydrochloric acid, etc.) in cleaning any accessories of the appliance.
