Arzum FUENTE AR 3041, Инструкция по эксплуатации

Страница: 17 / 36

17 ARZUM
• Never leave the power base unit and electrical connection ends of your
device in a damp state. If wetted, unplug before drying and no not operate
the appliance before having it dried completely.
• When filling with water remove the kettle from its power base unit.
• You can clean the outer surface of the kettle with a damp cloth. Make
sure that the power base unit is completely dry when cleaning.
WARNING
• Do not open the ON/OFF switch when the kettle does not contain water,
or filled with water below the minimum (0,5 Lt. limit.)
• When the water is finished inside of the kettle the ON/OFF switch must
be turned off.
USING THE KETTLE
• Do not use the kettle for any other purposes other than boiling water. Do
not fill with any other liquids or solutions.
• If the kettle is being used for the first time,
clean it before operation and pour away the first
boiled water and refill, repeating this process 2-3
times. Ensure that the water is filled up to the
MAX point. Boil the water until the appliance is
switched off automatically.
• Pour away the water and allow your appliance
to cool down.
• Make sure that the water is filled up to the maximum level.
• After boiling the water, some powder-like sediment may form due to the
hardness of the water. This is quite natural and has no adverse effects
whatsoever on human health.
• With the ON/OFF switch turned on “I”, the lid of
the kettle MUST be closed.
• Turn the main switch (on/off switch) to
the position “I“. Indicator light will turn on and
the water will begin to get warm. When the
water reaches boiling the kettle will switch off
automatically and the main switch will spring
back to the original position.
EN