USER MANUAL [1.4]
Page 36
• Select "WI FI" mode RS-232 interface»;
• Enter the access point name and password ("wifi ap name" and "wifi ap password»);
• If the connection is made using the output U0-U3 (IN_0-IN_3), the selected corresponding output must be
set to the "Reset WIFI" mode (Attention! Only one output must be set to this mode at a time).
In Arnavi-Configurator`s section "Common" displayed the current status of the WiFi module. Wi Fi module
can have the following statuses:
State
Description
Module not found
Arnavi 5 cannot connect to module (it is necessary to check the connection
and settings)
Network searching
Search for the access point specified in the settings
Network connecting
The module is connected, the process of connecting to the access point is
underway
Network connected
The connection to the access point is established, but there is no connection
to the server
Server connected
Connection to the server is established (normal mode)
