USER MANUAL [1.4]
Page 17
Note:
To enable understanding the beginning and end of a message, the latter are enclosed in
single quotation marks (‘). Do not use quotation marks when sending messages to the device.
4. SETTING VIA SMS
The structure of the message with the command to change the settings is as follows:
<access_password>*SETP*<changing_parameters_list>
By default, the <access_password> field has the value123456.
The <changing_parameters_list> field contains the number and value of one or more
parameters to be changed.
Each item of the changing parameters list has the following structure:
#<parameter_number>=<value>
<parameter_number> – the numerical index of the parameter.
<value> – the new value of the parameter, which can be either simple or composite.
List items are rendered without delimiters: the beginning of the next item is the sign of the end
of the previous one (symbol #).
If you type space key instead value – you will remove value from the server.
Example: ‘123456*SETP*#2= , , ’ – clear the APN parameters(space key instead argument)
When sending messages via SMS, it is necessary that the length of the message does not exceed
160 characters and that the message contains only letters of the Latin alphabet.
Monitoring server parameters 1
– Parameter number: 1
Command format:
‘#1=<server_address>,<server_port>,<protocol_type,<server_SN>,<server_password>’
Arguments:
<
server_address
> – a string with a length of up to 32 symbols. Contains the DNS name or IP
address of the server.
<
server_port
> – a number within the range from 1 to 65535. It is not a mandatory parameter
and this parameter is not required to be transmitted when it is not necessary to change the server port.
<
protocol_type
> – the number of the protocol: 0 – INTERNAL; 4 – EGTS.
<
server_SN
> – the ID for the server. It is not a mandatory parameter and this parameter is not
required to be transmitted when it is not necessary to change the ID for the server.
<
server_password
> – the password for the server. It is not a mandatory parameter and this
parameter is not required to be transmitted when it is not necessary to change the password for the server.
Examples:
‘123456*SETP*#1=193.193.165.165,20623,0’ – set the IP address, server port, and protocol
‘123456*SETP*#1= hw.geliospro.ru,20144,0’ – set the DNS name, server port, and protocol
‘123456*SETP*#1= hw.geliospro.ru’ – change only the server address.
