16
| Installation
Aruba Mobility Master Hardware Appliance
| Installation Guide
Rack Mount Installation- Mid
This mounting option allows mounting the Mobility Master hardware appliance from the middle in
standard two-post 19-inch Telco rack. The mounting brackets can be used for this installation as well.
Required Tools and Equipment
The following tools and equipment are required for installing a Mobility Master hardware appliance:
Mounting Bracket (x2) (included in the kit)
Screws for mounting bracket (x8): M4 x 8 mm Phillips Flat Head Screws (included in the kit)
Screws for system rack mount (x4): M6 x 15 mm Phillips Pan Head Screws (included in the kit)
Suitable Screwdrivers for all screw types provided in the box (not included in the kit)
Installation Steps
To install a Mobility Master hardware appliance from the middle in a standard two-point 19-inch
Telco rack:
1. Place the mounting bracket over the mounting holes on either side of the appliance in the middle
(see
Figure 7
).
Figure 7
Rack Mount Brackets- Mid
2. Secure the bracket to the appliance using the eight screws for the mount bracket (four per
bracket) and a suitable screwdriver.
3. Mount the appliance within your organization’s rack system using the four screws for system rack
mount (two per bracket) and a suitable screwdriver (see
Figure 8
).
Each Mobility Master hardware appliance should have its own mounting equipment. Do not place other
networking equipment directly on top of a mounted Mobility Master hardware appliance. Failure to do so can
damage the device.
Some racks require screws that differ from those included with the Mobility Master hardware appliance.
Ensure that you have the correct screws before installing the Mobility Master hardware appliance.
