The front panel transceiver slots support only SFP transceivers. To use SFP+ or QSFP+
transceivers with the switch, install an optional uplink module on the rear panel of the switch. (See
Install an optional uplink module
.)
Procedure
1.
(Optional) Connect an RJ-45 to DB9 console cable (not included) to the Console port and to a workstation
running suitable terminal emulation software. You can also connect a micro-USB console cable (not included)
to a workstation running suitable terminal emulation software.
If cables are connected to both the Console port and the micro-USB port, input is accepted only from the Micro
USB connector. (Echo output is accepted through both ports). See the information on connecting a
management console in the
Aruba 2930M Switches Installation and Getting Started Guide
at
http://
www.hpe.com/support/manuals
.
2.
(Optional) If you plan to manage the switch from a dedicated management network, connect an RJ-45 network
cable from the management network to the
Mgmt
port.
Chapter 3 Mount the switch and connect to the network
11
