Procedure
1.
Attach the four self-adhesive pads to the bottom corners of the switch.
2.
Position the switch with the top panel up on the selected horizontal surface.
Ensure that the power cord and network cables at switch mounting location will not create a
tripping hazard.
Avoid blocking any ventilation openings on the sides, rear, or front of the switch. For more
information on proper ventilation spacing, see
Installation precautions and guidelines
on page
5.
3.
Go to
Connecting the switch to the network
on page 10.
Connecting the switch to the network
Prerequisites
Gather the following:
• (Optional) The RJ-45 console cable (not included) or a micro-USB console cable (not included)
• Network cables (not included) for connection to the switch RJ-45 data ports. (For cabling specifications for
your switch, see the
Aruba 2930M Switches Installation and Getting Started Guide
at
http://www.hpe.com/
support/manuals
.)
• (Optional) One or more SFP transceivers supported by the switch.
10
Aruba 2930M Switches Quick Setup Guide and Safety/Regulatory Information
