Aruba 303H Series Hospitality Access Point
| Installation Guide
3
Table 2
Radio Status LEDs
Network Status
The Network Status LED, located on the sides of the E1-E3 ports, indicates activity transmitted to/from the wired
ports, as shown in
Table 3
.
Table 3
Network Status LEDs
PoE-PSE Status
The PoE-PSE LED are located above ports E1-E3, and indicate when the access point is operating as Power
Sourcing Equipment (PSE), providing Power over Ethernet (PoE) to an external device that is physically connected
to the E3 port by Ethernet cable, as shown in
Table 4
.
Table 4
PoE-PSE Status LEDs
LED Display Settings
The LEDs have three operating modes that can be selected in the system
management software:
Default mode: Refer to
Tables 1-3
Off mode: LEDs are off
Color/State
Meaning
Off
Meets one of the following conditions:
both radios are disabled
device is powered off
Green/solid
Both radios enabled in access mode
Green/blinking
1
One radio enabled in access mode; one radio
disabled
Amber/solid
Both radios enabled in monitor mode
Amber/flashing
Device ready; operating in power-save mode, with
uplink
negotiated at
suboptimal speed (<1Gbps)
Alternating
3
Error condition
Color/State
Meaning
Off
Meets one of the following conditions:
device is powered off
port is disabled
no link/activity
Green/solid
Link established at max speed (1Gbps)
Green/blinking
Activity detected across a max speed link
Amber/solid
Link established at reduced speed (10/100Mbps)
Amber/blinking
Activity detected across a reduced speed link
Color/State
Meaning
Off
Access point not supplying PoE, or powered off
Green/solid
Access point supplying power to a connected device
Green/blinking
Negotiating PoE power supplied to a connected device
